Changing Your HOS Status Automatically
For the ELD Version of Hours of Service
Your HOS status changes automatically from On Duty to Driving if your vehicle is moving. Your status changes automatically from Driving to On Duty if your vehicle is stationary.
If your status does not change automatically, check the malfunction and diagnostic indicators on the HOS Status screen and use the Troubleshooting Malfunctions and Diagnostic Issues section to find out how to solve the issues.
For the AOBRD Version of Hours of Service
Your account might be configured to automatically change your HOS status from Off Duty to On Duty when you sign in, from Off Duty to Driving when vehicle movement is detected, or from any status to Off Duty when you sign out.
If your HOS status does not change automatically, but you are expecting it to, check the following:
- Do you have Location Services enabled on your device? Go to the device's settings to check.
- Is there a diagnostic issue or malfunction? Check whether the indicators on the HOS Status screen are orange or red.
- Is the status not changing automatically, even though these two settings are okay? Contact your supervisor to check whether your account has been configured correctly.
To change your HOS status manually, go to the HOS Status screen and tap the appropriate status button whenever your HOS status changes.
Depending on your account configuration, you might receive a Warning when changing HOS status, to remind you of time remaining against current HOS rules.
When vehicle movement is detected, you are automatically placed into the In Motion mode. The In Motion UI displays the following information:
- Current HOS status (Driving)
- HOS clocks showing the time spent in the current status and the time remaining before HOS limits for the day and the week are exceeded.
- Information about the driver, the vehicle, the rule set, and the exemption enabled (if applicable).
- The malfunctions and diagnostics indicators. These are colored if there are any issues.
- An On Duty button that allows you to manually switch your HOS status to on duty when you have finished driving. This button is disabled while your vehicle is moving.
To exit the In Motion mode, either tap On Duty or wait for the mode to exit automatically. The latter occurs when there is a valid connection to your vehicle ECM and no movement has been detected for more than 6 minutes. The process of automatically switching to the On Duty status begins with the display of a warning message if the vehicle has been stationary for 5 minutes. If you do not react to this warning within a minute, you are automatically switched to On Duty.
Adding Status Notes to an Event
If you have Status Notes enabled in your account, you are prompted to select an event type whenever you change your status. The screenshot below shows the possible event types when going on duty.
The selected event type is added to the notes. You can add further notes to the status change, if required.
Updating Your Event Location Manually
Normally your event location updates automatically when you change your HOS status. However, if no valid GPS signal has been received from the vehicle unit, you are prompted to manually enter the address where the HOS change was made, for logging purposes.
If this is the case, you see a list of recent locations to choose from and the option to add a Custom Location.
If your location is listed, tap the appropriate location and then tap Done.
If your location is not in the list:
- Tap Custom Location.
- Enter as many of the address details as possible.
- Tap Search.
- If matching addresses exist in the system, these are in the list. Tap the closest matching suggestion or, if there are no suggestions or none of the suggestions match, tap the unverified address.
- Tap Done. Because you have entered your location manually, an 'M', for manual entry, will be shown in the latitude and longitude fields of your daily log.
We recommend that you choose an address from the search results where possible, so that exemptions can be calculated accurately. It is possible that choosing the unverified address can falsely mark you as ineligible for some exemptions. This is because these exemptions require you to start and end your work shift at the same location.